Labuan and Kota Kinabalu An official distributor of MSA, KStrong and Bullard Monday to Friday, 8.30am to 5pm

Gas detector rental in Malaysia for confined space work and shutdowns

Single gas and multi-gas detectors for a calibration gap or a shutdown, for as long as the job runs.

MSA Galaxy GX2 test and calibration station

TopBorneo rents out portable gas detectors across Malaysia.

Rental answers two situations. Your own detectors are due for calibration and the permit work cannot wait, or a shutdown puts more crews into confined spaces than your own units can cover. Both are answered from the same enquiry.

Detectors for a calibration gap or a shutdown

WhereAcross Malaysia and Brunei
ForA calibration gap, or a shutdown with more crews than units
You sendGases to measure, number of units and the dates
ConditionInspected before it goes out

Why work with TopBorneo

We think along with every project

Tell us the job, the site and the crew. We work out what fits instead of sending a catalogue back.

Official lines, every budget

MSA, KStrong and Bullard straight from an official distributor, with lighter lines alongside them.

Serviced in house

Gas detectors, breathing apparatus and cylinders are serviced by our own technicians.

One team from quote to delivery

The same people handle your enquiry, your order and your servicing.

Read more

Open a section to read the detail behind it.

Which type of detector the job needs
Type What it does
Single gas detector Watches one gas only. Small, worn on the collar, usually for one known risk.
Multi-gas detector Watches several gases at the same time in one unit. This is what people mean by a four gas detector.
Pumped or sampling detector Pulls air out of the space through a hose, so a tank or a manhole is tested before anyone climbs in.

Say which of these the job needs and which gases have to be covered, and TopBorneo confirms what is available for your dates.

Rent while your own detectors are on the calibration bench

MSA recommends a bump test before each day's use and calibration at a maximum interval of six months. Detectors that were bought together are due for calibration at the same time, so a site can have all its detectors away in the same week. A rented set keeps the permits moving while the workshop works through your own units.

TopBorneo calibrates detectors in its own workshop. See ALTAIR 4XR and 5X calibration for the MSA models, and portable gas detector calibration for the rest of your detectors.

Confined space entry and the gas test

Malaysia's Industry Code of Practice for Safe Working in a Confined Space 2010 requires an Authorised Gas Tester and Entry Supervisor to carry out the gas testing before an entry. That person needs a detector that is in calibration, whether the unit belongs to you or is rented. TopBorneo supplies and calibrates the detector that person uses. If the entry also needs a tripod, a winch or a rescue set, see confined space equipment rental.

Looking for a detector to buy rather than to rent? The range sits on the gas detection page.

Where to reach TopBorneo
Office Address and phone
Kota Kinabalu, where the calibration workshop is Lot No 8, Lean Seng Industrial, Jln Undan, 88450 Kota Kinabalu, Sabah. Telephone 088-422 259
Labuan Unit No. 3A-3, Level 3A, Labuan Times Square, Jln Merdeka, Bandar Labuan, 87000 W.P, Labuan Federal Territory. Telephone 087-462 259

Common questions

Can you rent a gas detector in Malaysia?

Yes. TopBorneo rents portable gas detectors across Malaysia, next to supplying and calibrating them. Send the gases you need to cover, how many units and the dates, and TopBorneo confirms what is available. Confined space entries and shutdowns are the two situations this rental is built for.

Can I rent a gas detector while mine is being calibrated?

Yes. That is one of the two situations rental covers. MSA recommends calibration at a maximum interval of six months, so detectors bought in one order are due for calibration at the same time. A rented set covers that week, and your own detectors go through the TopBorneo workshop in the meantime.

How often does a rented gas detector need a bump test?

MSA recommends a bump test before each day's use, and a rented detector is no different from one you own. The unit passes when it alarms and reads within the maker's tolerance of the gas it was exposed to. A detector that fails does not go into a confined space until it has been calibrated.

What should I send when asking for a rental detector?

Send TopBorneo the gases that have to be covered, the number of units, the dates and the site. That is enough to confirm availability. If the detectors are needed because your own units are due for calibration, say so, because both jobs can then be planned together.

Ask for a rental detector

Email crm@topborneo.com with the gases, the number of units, the dates and the site. Or send the same by WhatsApp: Labuan +60 10 959 0259, Kota Kinabalu +60 16 775 0259. TopBorneo comes back with what is available and what it costs.


Your enquiry goes to the team in Labuan and Kota Kinabalu. Add the site, the dates and the quantities if you have them, and mention the serial numbers for servicing work.

How we handle your details: Privacy notice