Labuan and Kota Kinabalu An official distributor of MSA, KStrong and Bullard Monday to Friday, 8.30am to 5pm

Safety equipment for oil and gas work in Malaysia, from Labuan and Sabah

Gas detection, breathing apparatus and fall protection for platforms, terminals and shutdowns.

Offshore platform at sea

TopBorneo supplies, rents and services safety equipment for oil and gas work in Malaysia, from the offices in Labuan and Kota Kinabalu.

That covers portable gas detection, self-contained breathing apparatus (SCBA), fall protection and head protection, together with the calibration and inspection work that keeps each item usable on a work permit.

Offshore and onshore crews

SupplyGas detection, breathing apparatus and confined space equipment for platforms and terminals
RentalExtra sets for a shutdown, when there are more crews than units
ServicingCalibration, inspection and testing by our own technicians
WhereSabah, Sarawak, Labuan and Peninsular Malaysia

Why work with TopBorneo

We think along with every project

Tell us the job, the site and the crew. We work out what fits instead of sending a catalogue back.

Official lines, every budget

MSA, KStrong and Bullard straight from an official distributor, with lighter lines alongside them.

Serviced in house

Gas detectors, breathing apparatus and cylinders are serviced by our own technicians.

One team from quote to delivery

The same people handle your enquiry, your order and your servicing.

Read more

Open a section to read the detail behind it.

What the work needs
The job What the crew carries Where to look
Tank, vessel or pit entry Multi-gas detector, tripod, escape set (EEBD) confined space equipment
Deck, mast or scaffold work Harness, lanyard, anchorage fall protection
Purging and hot work A detector per person, SCBA for the standby team gas detection
Every site entry Helmet with chin strap, eye protection head and face protection
One term from that table In plain words
Confined space A tank, vessel, pit or duct a person can enter, that was never built to work in, and where the air can turn bad
Gas testing before anyone goes in

Malaysia's Industry Code of Practice for Safe Working in a Confined Space 2010 requires an Authorised Gas Tester and Entry Supervisor to do the gas testing and supervise the entry. That person needs a detector in calibration, and the permit file needs the certificate. Step by step, that sits on the confined space entry guide.

Detectors that stay within their interval offshore

MSA recommends a bump test before each day's use and calibration at a maximum interval of six months for detectors with standard XCell sensors. TopBorneo calibrates portable gas detectors in its own workshop and returns each unit with a dated certificate. See portable gas detector calibration, breathing apparatus servicing and gas detector rental.

Why Labuan matters here

Labuan lies in the South China Sea and works as the support base for the offshore fields off the west coast of Sabah. The office there is on the page for the safety equipment supplier in Labuan.

Common questions

Which safety equipment does an offshore crew in Malaysia need most often?

Portable gas detection comes first, because no confined space or hot work permit moves without a gas test. After that come SCBA and escape sets, fall protection for deck and mast work, and helmets with a chin strap. TopBorneo supplies these from Labuan and Kota Kinabalu.

Who is allowed to do the gas testing?

The employer appoints an Authorised Gas Tester and Entry Supervisor, or AGTES, under Malaysia's Industry Code of Practice for Safe Working in a Confined Space 2010. TopBorneo supplies and calibrates the detector that person uses. The permit file gets the dated certificate with it.

Can gas detectors be calibrated in Malaysia?

Yes. TopBorneo runs its own calibration workshop, so detectors used in Labuan and Sabah can be calibrated on the six month cycle without leaving Malaysia. Each unit comes back with a dated calibration certificate that goes into the permit file.

Does TopBorneo rent as well as sell?

Yes. The same equipment can also be rented instead of bought, which helps when some of the units on site are on the calibration bench and the work carries on. Rental runs from the same two offices as supply and servicing. Send TopBorneo the models, the quantities and the dates you need them for.

Send your list

Email your equipment list, or the model and serial numbers of the units that need calibration, to crm@topborneo.com, or send it to the Labuan WhatsApp number. TopBorneo replies with what is available and what each item needs.


Your enquiry goes to the team in Labuan and Kota Kinabalu. Add the site, the dates and the quantities if you have them, and mention the serial numbers for servicing work.

How we handle your details: Privacy notice